Proactive Abyss Pump Kit 1 – Abyss Pump and Level Controller


The Engineered Plastic Abyss® pump is capable of pumping up to 220 feet from ground level by simply connecting it to a 12 volt battery.  Kit Includes Pump and Abyss Level Controller


The Engineered Plastic Abyss® pump is capable of pumping up to 220 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells. Optional Accessories

Simplify and Expedite Your Next Sampling Event!

The Abyss® can operate under harsh conditions with higher turbidity.

The Abyss® is widely used as a remediation pump for groundwater pump and treat and as a solar pump.

The Abyss® can run continuously in water without the need for a cool down!

The Abyss® has a 3000 hour motor life!

The Abyss® has a sleek outside that minimizes well hang-ups.

The Abyss® is a very reliable and economical pump that provides a great bang for your buck!

The Abyss® contains field replaceable wear out parts.


Power Consumption: 60 WATTS (MAX)
Volt Recommendation: 12-15 At Source
Maximum AMP Output: 4 AMPS
Measurements: Length 12″ / Diameter: 3.82″
OptionalL: Abyss Low water level controller
Required Tubing: 1/2″ ID
Supplied with: 230 feet of heavy duty 10 gauge wire, Cigarette Plug, & Battery Clamps

Proactive Optional Abyss Controller

Proactive Abyss Level ControllerEngineered specifically for Proactive’s™ 12 Volt Engineered Plastic Abyss pump The Proactive™ Abyss Controller is engineered specifically for the Abyss® DTW 220ft high performance pump. The Abyss Controller 1 has the ability to shut the Abyss pump off when the water level is reached at the desired increment where you set the shut off probe. It is that simple. The Abyss Pump and Abyss Controller 1 are a great combination for Pump tests, Well evacuations, Storm water sampling, and pump and treat systems.

Simple to use!

Just set the 3 probes in the water column where you wish to set the desired turn on and turn off of the pump. The Abyss Controller 1 will do the rest. The use of a deep cycle battery or even solar panels can be used with the Abyss Controller 1. A neat feature with this controller is that you have the option to install an external float in a large tank; like a 40 foot sea container tank. So when the tank is full, the float will activate shutting off the controller, therefore, shutting off the abyss pump.

Great for use in these applications:

  • Pump tests
  • Well evacuation
  • Storm water sampling
  • Pump and treat systems

Additional information

Weight 40 lbs
Dimensions 18 × 15 × 13 in


There are no reviews yet.

Be the first to review “Proactive Abyss Pump Kit 1 – Abyss Pump and Level Controller”

Your email address will not be published. Required fields are marked *

You may also like…