$2,820.30
The Stainless Steel Mega-Monsoon® pump is capable of pumping up to 200 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous purging of groundwater wells. Proactive's Stainless Steel Pumps are patented for their unique design (#7584785). Simple to use and extremely powerful! The SS Mega-Monsoon® is capable of pumping up to 200 feet from ground level to water level. Simply, connect the pump connector to the Low Flow with Power Booster 3 "LCD" Controller, then to a 12 volt battery, energizing the pump. Sound Simple? We think so.
The SS Mega-Monsoon® can operate under harsh conditions with higher turbidity.
The SS Mega-Monsoon® has been installed in hundreds of remediation sites using pump and treat systems.
The SS Mega-Monsoon® can also be used with solar panels for long term remediation sites!
Why choose the SS Mega-Typhoon?
Simple to use!
Runs off any 12 volt DC batteries.
Lifts up to 200 feet deep from ground level to water level!
Reliable design is suitable for continuous purging of groundwater wells.
Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 3 “LCD” Controller and Non-Return Check Valve.
Easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 3 “LCD” Controller makes adjusting and reading the discharge rate a breeze!
Computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity. Long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
Simple to clean and decontaminate!
The SS Mega-Monsoon® is only 1.82" OD and constructed of three high polished stainless steel parts:
1.The replaceable motor module
2.The motor housing top connector
3.The outside pump housing
SS Mega-Monsoon® "30 Second Change Out Motor Design!" - A Great Value!
Should the motor fail, the field technician can change out the SS Mega-Monsoon® motor in less than 30 seconds! The SS Mega-Monsoon® comes complete with one additional motor module. The main wear out parts consisting of the motor and seal all have been incorporated in a single replaceable motor module. Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 30 seconds by a simple quarter turn twist! Once installed, your pump is essentially new and will have a life span identical to a new pump.
Power Consumption: 1100 WATTS (MAX)
Volt Recommendation: 12-15 At Source
Maximum AMP Output: 42 AMPS
Measurements: Length 7.5" / Diameter: 1.82"
Constructed: High Polish Stainless Steel
Required Tubing: 3/8" ID Tubing
Supplied with: 210 feet of Heavy Duty 12 Gauge PVC Wire neatly rolled on a Tubular Metal Reel with Pump Holder, 2 Motor Modules, Disposable Low Flow Control Valve, and Wrench
The Proactive™ Low Flow with Power Booster 3 LCD Controller is engineered specifically for the Stainless Steel Mega Monsoon® Pump. With the Low Flow Sampling Controller the user can precisely control the water discharge with the turn of a knob. The Low Flow Sampling Controller is used to monitor and regulate low flow sampling as low as 40ml/min. Simply connect the booster to a 12 volt battery and connect the pump to the booster and stand back for awesome pumping power!
